Strata managers & committees need clear numbers to plan lock replacements, rekeying programmes, & master key upgrades across multi-unit buildings. Below is a practical cost framework for Melbourne complexes, covering common scenarios, line-item ranges, & budgeting tips.
What drives total cost
- Number of doors & cylinders (front doors, fire doors, plant rooms, mailboxes, storage cages, common areas).
- Hardware type (standard vs restricted keys; mechanical vs electronic).
- Access hierarchy (simple rekey vs full master key system).
- Labour windows (business hours vs after-hours).
- Compliance upgrades (egress hardware, accessibility levers, fire-rated doors).
- Project logistics (tenant notifications, key distribution, site access).
Typical line-item costs (ex GST, AUD)
Site attendance & labour
- Standard callout (business hours): $90–$150
- After-hours callout surcharge: $180–$350
- Labour rate (per hour): $110–$165 (after-hours $150–$220)
Mechanical rekey & keys
- Rekey per cylinder (bulk works): $35–$70
- New standard key (cut): $6–$12 each
- Restricted key system setup (initial registration, profiles, stamps): $1,200–$3,500
- Restricted keys (additional): $15–$35 each
Hardware supply & install (per door, typical ranges)
- New entrance lockset (quality lever/knob): supply $120–$240; install $120–$180
- Mortice lock case upgrade: supply $180–$380; install $160–$240
- Door closer (where required): supply $140–$320; install $120–$180
- Strike plate/reinforcement or minor carpentry: $60–$180
Master key systems
- Design & key schedule (small–medium strata): $1,500–$5,000
- Master-keyed cylinders (bulk rate): $60–$140 each
- Grand/master/sub-master keys (initial set): $25–$60 per key
Electronic options (per opening)
- Electric strike or maglock hardware: supply $220–$520; install $200–$320
- Reader/controller/power (basic access point): $750–$2,200
- Credential/fob cards: $8–$20 each
- Software/licensing/onboarding (once-off): $800–$2,500
- Ongoing support (annual, optional): $350–$1,200 per system
Project overheads
- Tenant communications & key hand-over packs: $2–$6 per lot
- Disposal/recycling of old hardware: $2–$5 per door
- Contingency (recommended): 8–12% of hardware+labour
Note: Add 10% GST to the above ex-GST figures. Heritage or non-standard doors, fire doors, & custom finishes can lift costs.
Scenario budgeting (worked examples)
1) Large-scale rekey (100 apartments + common doors)
- Scope: 100 entrance cylinders rekeyed, 250 new keys issued, 12 common-area cylinders rekeyed.
- Estimate:
- Rekey cylinders: 112 × $50 = $5,600
- Keys: 250 × $10 = $2,500
- Labour (two techs, 1.5 days): $2,400
- Communications & hand-over: 100 × $4 = $400
- Contingency (10%): $1,090
- Subtotal ex GST: ~$12,000–$13,000
- Rekey cylinders: 112 × $50 = $5,600

2) New master key system (80 apartments, 20 common doors)
- Scope: System design, new master-keyed cylinders to entries & critical common doors, initial master/sub-master keys, 200 resident keys.
- Estimate:
- Design & schedule: $2,500
- Cylinders: 100 × $95 = $9,500
- Resident keys: 200 × $18 = $3,600
- Master/sub-master keys (25): 25 × $40 = $1,000
- Labour: $5,000–$7,000
- Contingency (10%): $2,000–$2,500
- Subtotal ex GST: ~$23,600–$25,600
- Design & schedule: $2,500
3) Emergency common-door failure (after-hours)
- Scope: Forced-open plant room; replace damaged mortice lock & secure access.
- Estimate:
- After-hours callout: $240
- Labour (2 hrs after-hours): $320–$440
- Mortice lock & hardware: $250–$450
- Subtotal ex GST: ~$810–$1,130
- After-hours callout: $240
Master key vs restricted keys vs electronic access
- Master key (mechanical): Low running cost; fast rollout; risk of key copying unless restricted.
- Restricted key systems: Keys cannot be duplicated without authority; controlled issuance; moderate upfront setup.
- Electronic access: Highest upfront; best audit trails, quick credential revokes, time-based access; ongoing support to budget.
Planning & procurement checklist
- Engage a residential locksmith Melbourne services to verify door counts, cylinder types, & any fire-rated/egress requirements.
- Decide hierarchy (GMK/MK/SUB) & restricted profile early.
- Bundle common-area works with lot-entry rekeying for scale pricing.
- Specify key control (authorised signatories, issue logs, lost key protocol).
- Schedule by stack/level to minimise tenant disruption.
- Require as-built key schedules, cylinder lists, & hand-over documentation.
- Include SLAs for emergency locksmith callouts & spare parts holding.
- Allow 8–12% contingency in budgets.
Ways to reduce total cost
- Standardise on one cylinder profile across the scheme.
- Use bulk procurement of cylinders & keys.
- Combine lock upgrades with door closer & strike adjustments in one visit.
- For high-turnover rentals, consider electronic access for faster revokes.
- Align works with other maintenance to avoid multiple callouts.
Compliance notes (Melbourne context)
- Ensure egress hardware remains compliant for fire stairs & exit paths.
- Use lever furniture for accessibility where required.
- Coordinate with fire doorset providers if modifying rated doors.
- Keep key control policies documented for insurance & audit.
Budget ranges by building size (mechanical rekey or like-for-like)
- Small (≤40 lots): $5,000–$12,000 ex GST
- Medium (41–120 lots): $12,000–$35,000 ex GST
- Large (121–300 lots): $35,000–$85,000 ex GST
- Very large (300+ lots or mixed-use): $85,000+ ex GST, or stage across FYs
Engagement model options
- Fixed-price package for defined scope (best for rekey programmes).
- Schedule of rates for reactive & small works.
- Panel agreement with response-time SLAs for emergencies.
Emergency callouts: what to pre-approve
- After-hours attendance cap (eg, two hours labour + parts limit).
- Pre-approved spare hardware list (mortice locks, cylinders, strikes).
- Authorised contacts & escalation path.
Conclusion
Lock replacement & rekeying in strata is manageable with accurate counts, clear key control, & the right procurement model. Set realistic line-item budgets, add contingency, & lock in emergency SLAs before you need them. For full-building programmes or rapid response, engage a Locksmith Melbourne to compress timelines & control costs.

Leave a Reply